Description
PC-CONCRETE™ anchoring and crack filling epoxy is the epoxy chosen to repair cracks in warehouse and factory floors. Dispense and apply using a standard size caulking gun. Cures hard enough to drive over within 3 hrs at standard temperature. Nothing stronger for your anchoring applications. PC-CONCRETE™ is a two-component (1:1 ratio), 100% solids, high modulus and structural epoxy paste. PC-CONCRETE™ is a solvent-free, no-odor, high strength, moisture insensitive epoxy system. The resin and hardener are uniformly dispensed from a 9 oz cartridge system and mixed through a mixing nozzle using a standard size caulking gun.
- Anchor into marine docks above or below water line
- Bond to pre-stressed floors
- Waterproof floor to wall cracks
- Seal crack in sanitation and chemical storage facility containment area
- Anchor-safe to floor prison and security pick-proof epoxy
- Repair floor in fire station garage
Net Content8Container TypeCartridgeFormPasteColorWhiteCompositionsDiglycidy Ether of Bisphenol A, Trimethylolethane Triglycidy Ether, Non-Hazardous Proprietary Ingredients, Ethylene Glycol, Titanium Dioxide, Silica, QuartzSpecific Gravity1.4Flash Point>300VOC Content7.84pH Range2 to 12Temperature Rating35 to 115Flammability Rating1Includes(2) Nozzles
Reviews
There are no reviews yet.